Call Us: +48 34 361 04 48 +48 34 387 20 45 Mail: sales@extralink24.eu

Fiber Optic Distribution Boxes

EXTRALINK ANN 1 CORE FIBER OPTI TERMINATION BOX
The equipment is suitable for many types of modules, used in cabling work area subsystem

Product description:

Description:
With protective doors, dustproof
Suitable for many types of modules, used in cabling work area subsystem
Embedded type surface, easy for installation and removal
Available for fiber optic SC simplex or LC duplex and can be used in both surface mounted
installation and concealed panel installation
All modules are solder less mode
Application:
– Optical fiber communication system
– Fiber optic CATV, FTTH Fiber to the Home
– Optical fiber access network
– Testing instruments, fiber optical sensors
– Fiber optic patch panels, cabinet type or wall-mounted type fiber optic distribution units
Technical Data:
Item Parameters:
– Scope of application 3.0 x 2.0 mm drop cable or indoor cable
– Fiber Cladding Diameter 125μm ( 652 & 657 )
– TBF Diameter 250μm & 900μm
– Applicable Mode Singlemode & Multimode
– Tensile strength >50 N
– Operating temperature -40~+85℃
– Adapter SC & LC
– Insertion loss ≤0.2dB(1310nm & 1550nm)
– Insertion loss 2
Photos:EXTRALINK ANN 1 CORE FIBER OPTI TERMINATION BOX 01 EXTRALINK ANN 1 CORE FIBER OPTI TERMINATION BOX 02 EXTRALINK ANN 1 CORE FIBER OPTI TERMINATION BOX 03 EXTRALINK ANN 1 CORE FIBER OPTI TERMINATION BOX 04 EXTRALINK ANN 1 CORE FIBER OPTI TERMINATION BOX 05

EXTRALINK ANN 1 CORE FIBER OPTI TERMINATION BOX 01

EXTRALINK ADELE 2 CORE FIBER OPTIC TERMINAL BOX – NEW

Product description:

1. Description:
●With protective doors, dustproof
●Suitable for many types of modules, used in cabling work area subsystem
●Embedded type surface, easy for installation and removal
●Available for fiber optic SC simplex or LC duplex and can be used in both surface mounted installation and concealed panel installation
●All modules are solderless mode
2. Application:
●Optical fiber communication system
●Fiber optic CATV, FTTH Fiber to the Home
●Optical fiber access network
●Testing instruments, fiber optical sensors
●Fiber optic patch panels, cabinet type or wall-mounted type fiber optic distribution units2 core newtable
Photos:

EXTRALINK AGNES 2 CORE FIBER OPTIC TERMINATION BOX
This fiber optic termination box is used for splicing and termination between indoor fiber optic cable and pigtails. The termination box is used for wall mounted or desktop applications.

Product description:

1. General Description:
This fiber optic termination box is used for splicing and termination between indoor fiber optic cable and pigtails. The termination box is used for wall mounted or desktop applications.
2. Features:
1). Light weight, small size and easy installation.
2). Made of high class engineering plastic ABS.
3). Special fiber routing designs to ensure the bending radii greater than 40mm.
4). Adopting the splice trays for easy operations.
3. Technical Parameter
1). Working temperature: -20°C ~ 70°C
2). Relative humidity: ≤85%(+30°C)
3). Atmospheric pressure: 70kPa ~106kPa
4). Dielectric strength: ≥3000V DC 1min,no spark-over and no flying arc
5). Insulation resistance: ≥1000MΩ/500V DC
Photos:EXTRALINK AGNES 2 CORE FIBER OPTIC TERMINATION BOX 06 EXTRALINK AGNES 2 CORE FIBER OPTIC TERMINATION BOX 05 EXTRALINK AGNES 2 CORE FIBER OPTIC TERMINATION BOX 04 EXTRALINK AGNES 2 CORE FIBER OPTIC TERMINATION BOX 03 EXTRALINK AGNES 2 CORE FIBER OPTIC TERMINATION BOX 01

EXTRALINK AGNES 2 CORE FIBER OPTIC TERMINATION BOX WITH ADAPTER

EXTRALINK ALICE 2 CORE FIBER OPTIC DISTRIBUTION BOX
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
– Total enclosed structure, be in nice shape.
– Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.
– Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
– Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adapter installation, easy maintenance.
– Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
3. Specifications:
1). Environmental Requirement
– Working temperature:-40℃~+85℃
– Relative humidity:≤85%(+30℃)
– Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
– Insertion loss:≤0.2dB
– UPC return loss:≥50dB
– APC return loss:≥60dB
– Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 2  104 MΩ/500V (DC);IR≥2 104MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover; U≥3000V
Photos:img_2D_00041 img_2D_00051 img_2D_00031 img_2D_00021 img_2D_00011

EXTRALINK ARIA 2 CORE FIBER OPTIC TERMINATION BOX

 

EXTRALINK BETTY 4 CORE FIBER OPTIC DISTRIBUTION BOX
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type  SC adapter installation, easy maintenance.
5). Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 2 MΩ/500V(DC);IR≥2 MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover; U≥3000V
Photos:img_2D_00031 img_2D_00041 img_2D_00051 img_2D_00021 img_2D_00011

EXTRALINK BERTA 4 CORE FIBER OPTIC TERMINATION BOX
Fiber Optic Terminal Box is a newly developed by our company for application of FTTH. The box is light and compact, especially suitable for protective connection of fiber cables and pigtails in FTTH.

Product description:

Introduction
1. Features
1).This box could be used for wall-mounted and desktop-mounted applications
2).The base and cover of the box adopts „self-clip” method, which is easy and convenient to open and close
3). Could be used for adaptors such as SC,FC, etc:
4). The max capacity is 4 fibers
3.The installation and application
1). According to the size of box size, drill the hole for M4 expand bolt
2). Knocking the plastic expand bolt into the hole.
3).Fixing the box to wall with 4×25 screw thread bolt
4).Cover the tray and terminal box
4.Main Technical Indexes
1)Environmental Temperature:-25°C~40°C;
2)Max capacity: 4 fibers;
3) Suitable types of fiber cables: 4 fibers indoor fiber cables
Photos:img_2D_00011 img_2D_00021 img_2D_00031

EXTRALINK SONIA 6 CORE FIBER OPTIC DISTRIBUTION BOX

EXTRALINK CAROL 8 CORE FIBER OPTIC DISTRIBUTION BOX
The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Wet-proof, water-proof, dust-proof
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type  SC adapter installation, easy maintenance.
5). Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
Photos:img_2D_00041 img_2D_00031 img_2D_00021 img_2D_00011

EXTRALINK DIANA 12 CORE FIBER OPTIC DISTRIBUTION BOX
EX12C1311-12R
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adapter installation, easy maintenance.
5). Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses SC adapter installation, easy maintenance.
5). Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 1000MΩ/500V (DC); IR≥1000MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover; U≥3000V
Photos:img_2D_00011 img_2D_00021 img_2D_00031

EXTRALINK DORIS 12 CORE FIBER OPTIC DISTRIBUTION BOX
EX12C1311-12C

The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication  network  system.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication  network  system.  The  fiber  splicing,  splitting,  distribution  can  be  done  in  this  box,  and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adapter installation, easy maintenance.
5).  Distribution  panel  can  be  flipped  up,  feeder  cable  can  be  placed  in  a  cup-joint  way,  easy  for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 1000MΩ/500V (DC); IR≥1000MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V (DC )/min, no puncture,no flashover; U≥3000V
Photos:img_2D_00031 img_2D_00041 img_2D_00051 img_2D_00011 img_2D_00021

EXTRALINK ESMER 16 CORE FIBER OPTIC DISTRIBUTION BOX
EX16C1303
This FTTH fiber optic splitter box offers spaces for splitters and fusions, allocates 16 SC adapters and working under both indoor and outdoor environments.

Product description:

1. General Description:
This FTTH fiber optic splitter box offers spaces for splitters and fusions, allocates 16 SC adapters and working under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTx networks.
2. Features:
• The Combination of PC and ABS material used ensures the body strong and light.
• Water-proof design for outdoor uses.
• Easy installations: Ready for wall mount – installation kits provided.
• Ready for splitters: designed space for adding splitters.
• Space saving! Double-layer design for easier installation and maintenances:
• Upper layer for splitters and distribution
• Lower layer for splicing
• Cable fixing units provided for fixing the outdoor optical cable.
• Protection Level: IP55
• Accommodates both cable glands as well as tie-wraps
• Lock provided for extra security.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 2 104 MΩ/500V (DC);IR≥2 104 MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V (DC )/min, no puncture,no flashover; U≥3000V

EXTRALINK EMILY 16 CORE FIBER OPTIC DISTRIBUTION BOX TYPE 1
EX16C1321-16G
The equipment is used as a termination point for the eeder cable to connect with drop cable in FTTx communication  network  system.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication  network  system.  The  fiber  splicing,  splitting,  distribution  can  be  done  in  this  box,  and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Material: wet-proof, water-proof, dust-proof, protection level up to IP65.
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adapter installation, easy maintenance.
5).  Distribution  panel  can  be  flipped  up,  feeder  cable  can  be  placed  in  a  cup-joint  way,  easy  for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 2 104 MΩ/500V (DC);IR≥2 104 MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V (DC )/min, no puncture,no flashover; U≥3000V
Photos:img_2D_00011 img_2D_00021 img_2D_00031 img_2D_00041

EXTRALINK EDITH 16 CORE FIBER OPTIC DISTRIBUTION BOX TYPE 1
EX16C1306-J
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication  network  system.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication  network  system.  The  fiber  splicing,  splitting,  distribution  can  be  done  in  this  box,  and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP55.
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adapter installation, easy maintenance.
5).  Distribution  panel  can  be  flipped  up,  feeder  cable  can  be  placed  in  a  cup-joint  way,  easy  for maintenance and installation.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 2 104 MΩ/500V (DC);IR≥2 104 MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V (DC )/min, no puncture,no flashover; U≥3000V

EXTRALINK EMMA 16 CORE FIBER OPTIC TERMINAL BOX
EX16C1306
The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Wet-proof, water-proof, dust-proof
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type  SC adapter installation, easy maintenance.
5). Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
Photos: img_2D_0007_large

EXTRALINK ELIZA 16 CORE FIBER OPTIC TERMINAL BOX BLACK
EX16C1306-2
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Wet-proof, water-proof, dust-proof
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type  SC adapter installation, easy maintenance.
5). Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
7). Cabinet contains 16x – protection sleeve 60mm
Photos:img_2D_00011 img_2D_00021 img_2D_00031 img_2D_00041

EXTRALINK FIONA 24 CORE FIBER OPTIC DISTRIBUTION BOX
EX24C1309-24A
The  fiber  splicing,  splitting,  distribution  can  be  done  in  this  box,  and meanwhile it provides solid protection and management for the FTTx network building.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication  network  system.  The  fiber  splicing,  splitting,  distribution  can  be  done  in  this  box,  and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adapter installation, easy maintenance.
5).  Distribution  panel  can  be  flipped  up,  feeder  cable  can  be  placed  in  a  cup-joint  way,  easy  for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 1000MΩ/500V (DC); IR≥1000MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V (DC )/min, no puncture,no flashover; U≥3000V
Photos:img_2D_00011 img_2D_00021 img_2D_00031 img_2D_00041

EXTRALINK FLORA 24 CORE FIBER OPTIC DISTRIBUTION BOX
EX24C1303-24X
This FTTH fiber optic splitter box offers spaces for splitters and fusions, allocates 24 SC adapters and working under both indoor and outdoor environments

Product description:

1. General Description:
This FTTH fiber optic splitter box offers spaces for splitters and fusions, allocates 24 SC adapters and working under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTx networks.
2. Features:
• The Combination of PC and ABS material used ensures the body strong and light.
• Water-proof design for outdoor uses.
• Easy installations: Ready for wall mount – installation kits provided.
• Ready for splitters: designed space for adding splitters.
• Space saving! Double-layer design for easier installation and maintenances:
• Upper layer for splitters and distribution
• Lower layer for splicing
• Cable fixing units provided for fixing the outdoor optical cable.
• Protection Level: IP55.
• Accommodates both cable glands as well as tie-wraps
• Lock provided for extra security.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 2 104 MΩ/500V (DC);IR≥2 104 MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V (DC )/min, no puncture,no flashover; U≥3000V
Photos:img_2D_00071 img_2D_00081 img_2D_00051 img_2D_00021

EXTRALINK GALLA 32 CORE FIBER OPTIC DISTRIBUTION BOX
EX32C1304
This FTTH fiber optic splitter box offers spaces for splitters and fusions, allocates 32 SC adapters and working under both indoor and outdoor environments

Product description:

1. General Description:
This FTTH fiber optic splitter box offers spaces for splitters and fusions, allocates 32 SC adapters and working under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTx networks.
2. Features:
•The Combination of PC and ABS material used ensures the body strong and light.
•Water-proof design for outdoor uses.
•Easy installations: Ready for wall mount – installation kits provided.
•Ready for splitters: designed space for adding splitters.
•Space saving! Double-layer design for easier installation and maintenances:
•Upper layer for splitters and distribution
•Lower layer for splicing
•Cable fixing units provided for fixing the outdoor optical cable.
•Protection Level: IP55.
•Accommodates both cable glands as well as tie-wraps
•Lock provided for extra security.
3. Specification:
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than 2 104 MΩ/500V (DC);IR≥2 104 MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V (DC )/min, no puncture,no flashover; U≥3000V
Photos:img_2D_00011 img_2D_00021 img_2D_00031 img_2D_00041 img_2D_00051 img_2D_00061

EXTRALINK HOLLY 48 CORE FIBER OPTIC DISTRIBUTION BOX
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.

Product description:

1. General Description:
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2. Features:
1). Total enclosed structure, be in nice shape.
2). Wet-proof, water-proof, dust-proof
3). Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in one.
4). Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adapter installation, easy maintenance.
5).  Distribution  panel  can  be  flipped  up,  feeder  cable  can  be  placed  in  a  cup-joint  way,  easy  for maintenance and installation.
6). Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
Photos:img_2D_00041 img_2D_00051 img_2D_00031 img_2D_00021 img_2D_00011

EXTRALINK FIBER OPTIC CABLE COILING BOX
Wall-mounted optical fiber distribution box for indoor applications

Product description:

– Wall-mounted optical fiber distribution box for indoor applications
– Place for fiber reserve up to 30 m
– Removable cable reel
– Can Install SC Simplex adapter
– Closed with two latches, seal
– Ease of installation, operation and maintenance
Photos:img_2D_00011 img_2D_00021 img_2D_00031 img_2D_00041

Back to Top
Enter your Infotext or Widgets here...